Motors, Electrical Parts & Tools



(m1) Geared Motor 3 - 13.5 volts DC

A powerful high quality geared motor by Metallus, which controls well from 3 - 13.5 volts. The Motor comes as an easy to assemble kit in a fitted box and includes miniature plugs, sockets, and wire, the set also includes a sprocket for Roller Chain, a 1" pulley, and a Delrin spur gear.

UK delivery only

£62.00
Out of Stock


(m2) 12 v Geared Motor for Meccano

These compact Motors are high quality Swiss/German made, they are very powerful yet quiet, speed is around 55 rpm at 12 volts. two mounting bolts in the base make a very easy and rigid fix to models.


Includes 2 minature plugs and sockets


Size L 3" x W x 1.75" x 1.75, (75 mm x 46 mm x 46 mm)
These motors control well with a Hamant and Morgan train Controller


Shaft size 10mm long x 4mm to take Meccano parts.
Motor can be slid forward in it's mounting in order to engage gears

£39.50
Out of Stock


4.1mm Drill

HSS Steel clearance drill for meccano holes

£1.15
Quantity:


3.2mm Drill

HSS Steel, tapping drill for 5/32" meccano threads

£1.15
Quantity:


Deluxe Drift

Stainless steel shaft with solid brass handle

£3.25
Quantity:


Insulating Spacer pack (4)

Length 10mm,Meccano thread
Price is for a pack of 4

£1.50
Quantity:


Minature Plug

Ideal for DC motors and wiring.
Available in Black or Red
Please choose option below for colour

£0.40
Quantity: Options:


Miniature Socket

Ideal for DC motors and wiring.
Available in Black or Red
Please choose option below for colour

£0.40
Quantity: Options:


(bh1)Bulb Holder

Fits Meccano bolts and hole spacing. (Colour Black)
For use with E10 Bulbs

£0.75
Quantity:


E10 Bulbs

3.5v. Available in Clear, Red, Yellow and Green.
Choose colour option below

£0.55
Quantity: Options:


Set of 4 E10 Bulbs

3.5v Bulbs, Red, Green, Yellow and Clear
1 each of the above colour

£2.00
Quantity:


(bh2)Compact Bulb Holder

To suit above bulbs. Can be secured with one Meccano Bolt in the insulated base (use a couple of washers under base to prevent contact with model)

£0.59
Quantity:


(ss1) Miniature Slide Switch

Size 35mm x 12mm x 17mm high

£0.75
Quantity:


(cl1) Pair of Insulated Crocodile Clips

I red, 1 Black (priced in pairs) wire attaches by small screw

£0.79
Quantity:


(iw1) 1mm Insulated Wire

Length 10 Metres, ideal for DC lighting and motors etc. Available in black & Red, choose option

£1.75
Options: Out of Stock


(cl2) Pair Insulated Leads with Crocodile clips

46 cm Long with Crocodile clip each end. Price for 2 leads, different colours. (pot luck)

£0.90
Quantity:


(is10) Insulating Washer (Nylon) (20)

1/2" diameter (12.5mm) x 1mm thick with a 4.5mm hole to take  Meccano Bolts or Axles for low voltage DC applications, this washer can also be used as a thrust washer were you want 2 parts to slip freely against eash other on an Axle, without the need for lubrication 

Pack of 20 for 60p 

£0.60
Quantity:


(is1) Insulated Strip 3 Holes

Made from phenolic resin laminate, colour brown

£0.25
Quantity:


(is2) Insulated Strip 4 Holes

Made from phenolic resin laminate, colour brown

£0.33
Quantity:


(is5) Insulated Plate 2x2 Holes

Made from phenolic resin laminate, colour brown

£0.35
Quantity:


(is6) Insulated Plate 2x3 Holes

Made from phenolic resin laminate, colour brown

£0.50
Quantity:


(is8) Insulated Plate 2x5 Holes

Made from phenolic resin laminate, colour brown

£0.82
Quantity:


7mm Deluxe Combination Spanner

Made from Chrome Vanadium Steel, 7mm open end with 7mm ring on opposite end to fit Metallus nuts

£1.35
Quantity:


(td1) Set of 3 Meccano taps 5/32" BSW

!st (Taper) 2nd and Plug (bottoming) Tap, these three taps are ideal for making Meccano threads (5/32" BSW) in brass, steel or a suitable plastic, the 1st tap gives you a start when tapping by hand, followed by the second tap, the plug tap is to finish of in a blind hole such as a screwed rod adaptor, you can start with the 2nd Tap if you are tapping with a machine, a drill press is ideal, unplug the machine and slacken the pulley belt, use the chuck for your tap, then pull the chuck round by hand, backing off every couple of turns to clear the swarf, this method will give you perfect parallel threads. (use a little light oil when tapping in steel )

£10.95


(td2) 1st or Taper tap 5/32" BSW

Taper tap for Meccano threads

£3.85


(td3) Second tap 5/32" BSW

Second Tap for Meccano threads

£3.85


(td4) Plug Tap 5/32" BSW

Plug or Bottoming Tap for Meccano threads

£3.85


(td5) Die for Meccano threads 5/32"

Split Die to cut Meccano threads 5/32" BSW

£6.95


(td6) Tap Wrench

Small tap wrench to suit above Taps

£4.50
Out of Stock


(td7) Die Holder (stock)

Die holder fo fit above Dies

£6.95


Hand Reamer

4.1mm HSS Drill with Brass Handle for reaming holes to fit Meccano Axles

£2.50
Quantity:


(sc1) 5" Scewdriver

125mm (5") long screwdriver with 4mm parallel blade 

Blade slips through Meccano holes for access to hard to reach bolts

High quality  Made in Germany

£5.25


(sc2) 3" Screwdriver for grubscrews

80mm (3 1/4") Long screwdriver with 3mm parallel blade, for Meccano slotted grubscrews

High quality Made in the EU

£5.00


(sc3) 4" Screwdriver

100mm (4") long screwdriver with 4mm parallel blade 

Blade slips through Meccano holes for access to hard to reach bolts

High quality Made in the EU

£5.50


(sc4) 6" Screwdriver

150mm (6") long screwdriver with 4mm parallel blade 

Blade slips through Meccano holes for access to hard to reach bolts

High quality Made in the EU

£5.95


E10 Flashing Bulbs

Flashing bulbs with E10 fitting 3.5 Volt, available in Red, Green, yellow or Clear, please choose option below 

75p each

£0.75
Quantity: Options:


8 mm Drill

HSS steel 8 mm Drill, for use with the large Axles and the Universal Boss

£2.75


Brass Contact Stud

Meccano part no 544, made from solid brass 3/8" dia with 6 mm long  Meccano 5/32" threads

 

Made in the UK

£0.76


Drill Chuck for Meccano

A neat little keyless chuck with a Meccano shaft, will take drills up to 8mm, Chuck size is 1.5" long x 7/8" wide,

the shaft is 4mm x 1 3/8" long

£10.50


Miniature Lathe Chuck for Meccano

These neat little 3 jaw chucks are only 48 mm in diameter, made from steel with a scroll mechanism they are quick to operate and are tightened with two small tommy bars.


Adapted to fit Meccano Large Axles 5/16" dia or the standard Meccano Axles (please choose option below)


I do reccomend the large axle option if you want to do any serious work, the standard Meccano axle version would only be useful for very light work

£35.00
Options: Out of Stock

Deluxe Hex Grubscrew Driver

Made from solid brass and steel, overall length 3 7/8" (98 mm)


Blade can be replaced when worn out

£4.50

Make payments with PayPal - it's fast, free and secure!